Juniper Publishers: An engineering Approach for 3-D Numerical Earthqua...

Juniper Publishers: An engineering Approach for 3-D Numerical Earthqua...: Civil Engineering Research Journal This approximate calculation method is developed and designed for replacement of the arbitrary No...

Comments

Post a Comment

Popular posts from this blog

A Review on Enhanced Productivity Approaches in VCM Suspension Polymerization- Open access Journals- Juniper Publishers

Image
Juniper publishers- Academic Journal of Polymer Science Authored by  Darvishi R VCM suspension polymerization is performed as the batch-wise process. For this, the productivity of this high demand product is low. As VCM suspension polymerization is an exothermic process, the full capacity of the cooling system remains idle most of the time during the course of the polymerization.There are three strategies for keeping the reaction rate constant during the entire polymerization process. fast initiator dosage during reaction, cocktail initiator system and the temperature trajectory are the strategies that one can utilize to maintain the polymerization reaction rate at a constant value close to the allowed maximum rate. There are several reports that investigated separately the PVC resin properties obtained by these modes of polymerization. However, no report is published to compare the specifications of each mode together and also the PVC resin properties prepared...
Read more

Polymer Composite Materials from Current Status to Future Prospects

       JUNIPER PUBLISHERS-   ACADEMIC JOURNAL OF POLYMER SCIENCE Abstract A call for novel material, new ideas, applications, and techniques are still and will be challenging all the time. The increased development of science and modern technology allows one to use a high-throughput search for novel materials that could give positive feedback in different areas of life. With increasing demand for high performance materials, the focus of recent researches has been to produce products with enhanced properties at minimal changes in the equipment, process and cost of inputs. The addition of clay minerals or nano-metal oxides to the polymers is to improve the polymer properties, their wide and demand characteristics or desired potential applications by producing the polymer nanocomposites. Scanning and transmission electron microscopy have led to a deeper understanding of polymer nanocomposites, a better account surface topology, structure and morphology. Keywords:...
Read more