Juniper Publishers Journal of Polymer science

Authored by Hiroshi Ito                                                                            Abstract In the present work, we tried to toughen polyamide 6 (PA6) by blending a small amount of low molecular-weight polyethylene (LMWPE). We obtained the PA6/LMWPE blends with different morphologies using multiple melt-kneading methods such as the uniaxial melt-kneading, the eight-axial screw melt-kneading, and the high shearing method. As a result, it was elucidated that the LMWPE was homogeneously and finely dispersed by using the eight-axial melt-kneading method. On the other hand, we found that for high shearing me...

Authored by Ahmad AdlieShamsuri   Opinion The development of the polymer composites industry has been very encouraging in the past years. The polymer blends have also been received considerable attention, this is due to the blends are easy to prepare, their production cost is low, and so on. At the present time, bioplastics such as polylactic acid, polyhydroxybutyrate and polybutylene succinate are gaining consideration due to their excellent biodegradability, biocompatibility and non-toxicity. Blend between bioplastics and biopolymers (for example; cellulose, zein and starch) to produce bioplastic/biopolymer blends have attracted the researchers’ interest. Besides, the produced bioplastic/biopolymer blends may also be able to be used in fabrication of biocompatible and biodegradable products. Moreover, the utilization of expensive synthetic bioplastics can be reduced through consumption of biopolymers this can further lower the cost of products [1,2]. Nevert...